Skip to content
Tech Suppo
Menu
  • News
  • Review
  • Internet
    • Windows
    • Blog
Menu

Can’t install Windows 10 Feature Update 1903? Try these solutions

Posted on December 9, 2021

Windows 10 Version 1903 Update, also known as May 2019, is now almost available to everyone with a host of new features and improvements. In earlier versions, Windows 10 feature updates are downloaded and installed automatically. But now with the latest version 1903, Microsoft has made a welcome change that the user must click to download the Windows update. The general update process is easier, but for some users, the Windows update 1903 failed with error code 0x8007000e, the update stuck on download For other users getting the following error

There were problems installing some updates, but we will try again later. If you keep seeing this and want to search the web for information or contact support, this may help:

Feature update to Windows 10, version 1903 – Error 0xc19001e2

No operating system found

First of all, disconnect all external devices including printer, scanner, external hard drive and restart Windows. Verify that the windows have started normally

Set hard drive as the first boot device

Since this error often occurs when the BIOS cannot find the hard drive, checking the BIOS settings could be a good solution.

To check the BIOS settings, follow these steps:

  • Restart the computer
  • Press the F2 key to open the BIOS menu.
  • Check the main BIOS screen to see if it detects the hard drive,
  • Also, check the boot order to see if it is configured correctly.
  • Verify that the hard drive is the first boot device.

If the hard drive is not detected correctly, consider replacing the data cables or resetting the BIOS settings to default.

YOU CAN ALSO READ:   Solved: This device cannot start (code 10) Network adapter error

Here are the steps to reset the BIOS settings:

  • Enter the BIOS screen by following the steps outlined above
  • Look for the “Reset to defaults” option.
  • Choose the restart option and answer “Yes” when asked for confirmation
  • Then, select the option «Exit -> Exit saving changes».

Perform Windows Startup Repair

Windows Startup Repair can recover certain errors related to the boot process in some cases. Here are the steps to access Startup Repair from advanced options. Since Windows cannot boot normally due to this problem, you need a Windows installation media to perform the following steps. If you don’t have, check out how to create Windows 10 bootable USB from here.

  • When you are ready with the Windows 10 / USB installation media
  • Put Windows Boot Media on the computer and boot from there.
  • On the first setup screen, choose your Language, Time – Currency and your keyboard input method and click Next.
  • Now on the next screen, select Repair your computer.

This>

Please wait>

Also read: Repair Automatic repair failed to repair your PC in Windows 10

Repair damaged boot files

If startup repair didn’t fix the problem, follow the steps below to configure and repair your startup files.

  1. Again, boot from the Windows 10 installation media
  2. Once you’ve reached the Windows Settings screen, press the SHIFT + F10 keys to bring up the command prompt.

Now find out if your disk is set to GUID Partition Table (GPT) or Master Boot Record (MBR):

YOU CAN ALSO READ:   What is the difference between CC and BCC in an email?

At the command prompt, type diskpart and press Enter.

Now write list disk and hit Enter key to find out if your disk is configured for GPT or MBR partition.

Look at the GPT column to see if it has an asterisk

  1. .
  2. If you see an asterisk

that means the partition table of your disk is GPT.

If you don’t see an asterisk, that means your disk’s partition table is MBR.

Type exit and press Enter.

Now Fallow down. We have two different solutions for different partitions.

Fix boot files in MBR partition table Note: if you have a GPT partition, skip this step and follow the next false step Now find out the Drive letter where Windows was installed. You can do this by typing the command type type

list volume

and pressing the Enter key. You will notice the drive letter where Windows is installed as a boot.

When you find out which drive contains the Windows folder, (for me its “C:” drive), give the following command to create the boot files on that drive and hit Enter.

  • bcdboot C: Windows / SC: * Note: If Windows is on a different drive, change the letter C to that drive letter. After running the command again, open the utility DISKPART writing the command diskpart and
  • press the enter key. Here on the disk of the list of types of utility part of the
  • disk, press the Enter key.
  • Select the disk letter with the command
  • select disk 0
  • Type the Fallowing commands one by one as per the instructions below volume list
  • select volume 3
YOU CAN ALSO READ:   Fix: WudfRd driver failed to load

(Here select the volume number that contains the Windows operating system)

active

Type> exit to close the DISKPART tool. All of that now delete the installation media and restart your computer.

Fix boot files in GPT partition table If you have GPT partition table fallow down. Scribe diskpart and

press

enter to open the diskpart utility and type the following command. disk list

select disk 0 (Select disc number). Then write the

partition list

commands and press the Enter key.

Find out here which Partition is labeled System. And select the system partition by type below the command

select partition X

(where “X” is the number of the partition labeled System. For example, “4”).

Assign a drive letter (for example, the letter “H”) to the system partition by typing the following command and press Enter: *
assign letter = H:

* Note: If the drive letter “H” is already in use, please indicate the next drive letter in the alphabet.

type exit and press Enter to close the DISKPART tool.

Again the Type Bellow commands one by one

cd / d H: EFI Microsoft Boot

ren BCD BCD.bak bcdboot C: Windows / l en-es / sm: / f UEFI Note: Change the letter

«H»

if you have assigned a different drive letter to the system partition. That is all. Remove the installation media and now close all windows, restart your computer. Check the problem solved.

If all the above methods failed, perform the

clean installation of Windows.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *




Credits

  • Contact Us
  • CCPA
  • DMCA
  • Privacy Policy
  • Terms of Use
©2023 Tech Suppo | Design: Newspaperly WordPress Theme
Go to mobile version