According to some users, it is a common phenomenon that when you try to run the chkdsk check disk tool to check for disk errors, you encounter a problem: » Windows 10 can’t run check disk on this volume because it’s write-protected .
CHKDSK cannot lock the current description of the drive
In this regard, you may notice that you cannot run chkdsk at any time. Sometimes you were unable to use chkdsk because the process is being used by another volume in Windows 10.
As the screenshot shows, chkdsk this type of file system is NTFS and cannot lock the current drive. Windows 10 will come to you when you try to run chkdsk /r or any other check disk process.
Or some of you may perform chkdsk from startup on Windows 10, you will encounter the problem that startup repair cannot repair this computer automatically.
Whatever the case, it is urgent for you to resolve this chkdsk cannot run because the volume is in use by another Windows 10 process, no matter whether you should lock drive C: or D: or F:.
What is the CHKDSK utility?
First of all, you are supposed to learn what the chkdsk command is and what it is used for in Windows 10. Only in this way can you know when and why you will stumble on Windows 10 cannot run this disk by checking this volume.
Chkdsk is short for Check Disk . It is mainly engaged in fixing various disk problems, with which you can run chkdsk r: or any other disk to check errors on it. Normally, the chkdsk utility can help you detect some problems with the disks, but in order to repair them, you must have privileges to access them.
From this perspective, you may often need to run this command to solve some disk problems, so when you encounter chkdsk cannot lock the current drive in use by another process, it is very necessary for you to fix this chkdsk error.
How to fix CHKDSK cannot lock current drive error Windows 10?
As you can see, the reasons why chkdsk cannot lock the current drive in Windows 10 can be divided into three parts, namely a bad chkdsk dick verification process, another program using this drive, and a Windows system problem. 10.
Due to the above three causes, you encounter chkdsk cannot lock the current drive because the volume is in use by another process or the disk is write-protected from Windows 10.
Now let’s start to fix this Windows 10 cannot run check disk error.
Solution 1: Run Chkdsk Successfully on Windows 10
It doesn’t matter if you want to run chkdsk r: or other disks, you need to run the chkdsk command successfully. On that basis, it will not be affected by the NTFS file system type and cannot lock the current Windows 10 drive.
It is recommended that you run the chkdsk command at the Windows 10 command prompt to remove write protection.
1. Enter the Symbol of the system in the search box and then right click on the result to Execute as an administrator .
2. Then in the symbol of the system enter chkdsk
Here you can replace the drive letter with whatever drive you want to examine, such as C: or F : or D: .
here take chkdsk c: / f / r / x as an example.
After that, chkdsk will start looking for corrupt files on the drives. And if not, you will undoubtedly get the error that chkdsk cannot run because the volume is in use by another process. Do you want to schedule this volume to be checked the next time the system is rebooted?
Under this circumstance, chkdsk was unable to lock the current drive as the disk is used by another process. I would have to try more ways.
But here you can master the correct way to run chkdsk on Windows 10.
Solution 2: Fix disk errors
It says that CHKDSK cannot lock the current drive as there are disk errors. Therefore, it is highly necessary for you to remove all these disk errors in case they cause CHKDSK to fail.
Many of you are not so skillful in fixing this disk issue on your own, so you can also try Advanced SystemCare to allow it to detect and repair disk errors in Windows 10, therefore repairing CHKDSK cannot lock the current drive.
one. Download install and run Advanced SystemCare.
2. Locate tool box and then select Disk Doctor to install it right away.
3. in IObit Disk Doctor , select the drive to be scanned and then press Following to correct disk errors.
Four. Disk Doctor is scanning the selected drive(s) . It will last several minutes.
5. In the Analysis results you can see whether or not errors are found.
Once the disk errors are fixed through Advanced SysetmCare, you can use the CHKDSK tool to lock the drive as desired.
Solution 3 – Use Chkdsk in Safe Mode
For customers who found chkdsk can’t lock current Windows 10 drive in startup repair, maybe you can try enter safe mode and check what leads to chkdsk write protect error cannot be run with minimal set of programs.
In safe mode, you can also run the chkdsk command with restricted applications. You can see if it can help with the chkdsk not working issue in Windows 10.
1. Search msconfig in the frame Start search and then press enter to go to the window System configuration .
2. In the window System configuration check the box for secure boot and then the option Minimum will be chosen automatically.
After that, click Apply Y Accept to save the changes.
3. Then decide restart .
By restarting your computer, you will have entered safe mode in Windows 10. In this regard, you can try using the chkdsk utility to run a disk check.
Here you can notice that Windows 10 cannot run chkdsk because this volume is in use by another process has disappeared.
Solution 4: Boot Windows 10 to Windows CD or DVD
If you receive this chkdsk can’t open volume for shortcut on startup, you also won’t be able to transfer logged messages to event log with status 50 in Windows 10.
Once you find that you encounter this disk check error, you can go to the Windows CD or DVD disk and then run the chkdsk command to check the disk situation as you like.
1. Put the Windows system DVD disc into the DVD drive.
1. Restart the computer to set up to boot from the DVD drive. Use the DVD system disc to fix this problem.
3. Select the Idiom , Edition Y Architecture for the system.
4. You must repair your computer .
5. Then go as the path:
Solve problems > Advanced Options > Symbol of the system .
6. now will be better get in chkdsk
7. Once you are prompted again with the error message that the drive is write protected, chkdsk cannot lock the current drive, input diskpart and then the volume list .
8. Check the local disk which install Windows 10 system. Here it is C: .
9. All set, please enter chkdsk command again to see if the problem that Windows cannot run check disk on this volume because it is write-protected, Windows 10 is gone.
To make a summary, easily remove chkdsk won’t work, can’t lock disk in Windows 10, the above ways are suitable and effective.
Windows 10 stuck on repairing disk errors
api-ms-win-core-libraryloader-l1-1-1.dll is missing in Windows 10