Windows

Fix 0xc000000e Boot Error in Windows 10/8/7

If you found the terrible Boot error 0xc000000e When trying to boot Windows 10, this post will help you out of trouble. Here, I will tell you How to fix 0xc000000e Boot Error in Windows 10, 8 / 8.1 and 7 . Also, I will explain what this confusing error is and what are the causes of its appearance on your PC.

What is boot error 0xc000000e in Windows 10?

Windows uses many services, programs, and data to get the fastest performance for your tasks. When doing this, there can sometimes be certain errors and problems that will prevent Windows from working normally. The boot error 0xc000000e it’s an annoying error of Windows BSoD (blue screen of death) that appears when trying to load Windows with corrupted boot data. When this error occurs, you will see a pop-up window appear on your screen with the error code 0xc000000e and a message informing what is happening.

Some common messages that appear with this error code are as follows:

  1. The selected entry could not be loaded
  2. A required device is not connected or cannot be accessed
  3. A required device is inaccessible
  4. The selected entry could not be loaded because the application is missing or corrupted
  5. Boot selection failed because a required device cannot be accessed

These notifications appear in different circumstances and for different reasons.

What Causes Boot Error 0xc000000e in Windows 10?

There are many different causes for the occurrence of this error on different computers. I will tell you about the most common causes, so that you can understand them and try to diagnose why this error is worrying you. This will help you deal with the situation in a better way. The following are some of the main Causes of the boot error 0xc000000e:

  1. A troublesome external drive.
  2. Damaged, missing, or incorrectly configured BCD.
  3. A faulty data cable from the hard drive.
  4. Disk marked offline
  5. Incorrectly configured, outdated, corrupted, or incompatible drivers.
  6. Incorrect BIOS settings

There are other causes as well, but they are generally not the main culprit for this error. So, we can ignore them, for now, so as not to complicate the scenario.

YOU CAN ALSO READ:   Snapseed for PC - Free Download for Windows 10, 8, 7

How fix error 0xc000000e

If you have identified the cause of the boot error 0xc000000e on your computer, it will be easy to fix. You can use the most appropriate method from the following to apply it to your PC. All methods are genuine and explained in simplified steps.

1. Use the automatic repair utility to correct the boot error 0xc000000e

Windows has a built-in utility to treat various problems known as automatic repair. You can use it to resolve certain boot-related errors. It is a good method to correct the boot error 0xc000000e . Follow these steps to learn how:

Step 1: in first place, start Windows from the Windows installation media.

Step 2: Now click Next in the settings page and select the language, time, and keyboard input.

Step 3: Then click Repair your computer and then click Solve problems.

Step 4: Go to Advanced Options now.

Step 5: Here, choose Auto repair and choose your operating system to run the utility.

Step 6 Wait until the tool diagnoses and repairs the problems.

Done.

2. Use the CHKDSK tool to correct the boot error 0xc000000e

You can use the Disk Checker tool to look for errors and problems that arise on the disk. This can help you fix the boot error 0xc000000e. Follow these steps to find out how:

Step 1: in first place, start Windows from the Windows installation media.

Step 2: Now click Next in the settings page and select the language, time, and keyboard input.

Step 3: Then click Repair your computer.

Step 4: Choose the unit of install Windows now, which is usually C: /, and then click Next.

Step 5: when the options appear Recovery of the system , select Symbol of the system from there.

Step 6: In the command prompt window, type chkdsk C: / f and press the key Intro .

Note: Must replace C: in the command with the letter of the drive where Windows is installed on your PC.

3. Unplug troublesome additional devices to correct the boot error 0xc000000e

Sometimes troublesome add-on devices are the cause of the boot error 0xc000000e. You can remove them to simply solve the problem. Follow these steps to learn the process:

YOU CAN ALSO READ:   Repair missing battery icon in Windows 10 [6 methods]

Step 1: disconnect all additional devices that were recently connected to the computer. These will include USB drives, CDs, DVDs, card readers, speakers, etc.

Step 2: now try Start Windows.

Step 3: If you are successful in starting Windows after removing the additional devices, then connect the devices one by one. When the error reappears after plugging in a certain device, you can mark the device as problematic and remove it from your PC.

Done.

4. Mark the disk as online

If the reason the error appeared on your computer is a disk marked offline, this method will work for you. Follow these steps to learn how:

Step 1: in first place, start Windows from the Windows installation media.

Step 2: Now click Next in the setup page and select the language, time, and keyboard input.

Step 3: Then click Repair your computer.

Step 4: Choose the unit of install Windows now, which is usually C: /, and then click Next.

Step 5: when the options appear Recovery of the system , select Symbol of the system from there.

Step 6: In the command prompt window, type diskpart and press Get in.

Step 7: Now write list disk and press Enter.

Step 8: Then write the disk X (X is the number of the disc you want to dial) and press again Get in.

Step 9 Finally, write the disk in line X and press Get in.

That’s it.

5. Check the defective cables.

You can check for visible faults or damage to the cables from data of HDD. If there is no visible fault, you can disconnect it and replace it with another cable to check if it is causing the problem in your case.

6. Check the boot order

You can correct the incorrectly configured BIOS by checking the boot order. Follow these steps:

Step 1: reboot your computer and press the required key to load the BIOS menu. You can usually see which keys you need to press to open the BIOS on your screen.

YOU CAN ALSO READ:   System restore did not complete successfully

Step 2: in the BIOS menu, switch to the tab start and check the order. You can use the arrow keys to change it.

Step 3: if something changed, save and out. Make sure you know exactly what you are changing, or else don’t change.

Done.

7. Update drivers

Faulty or outdated drivers lead to many problems. Drivers should be updated regularly. You can update the drivers manually with the Device administrator . Or you can use third party driver updaters to update and repair drivers in the easiest way.

To choose the right driver update tool for you, check out our list of 8 Best Driver Updates for Windows 10 .

8. Rebuild BCD

Rebuild BCD is the ultimate solution to solve this problem. Follow these steps to find out what you need to do:

Step 1: in first place, start Windows from the Windows installation media.

Step 2: Now click Next in the settings page and select the language, time, and keyboard input.

Step 3: Then click Repair your computer.

Step 4: Choose the unit of install Windows now, which is usually C: /, and then click Next.

Step 5: when the options appear Recovery of the system , select Symbol of the system from there.

Step 6: At the command prompt window, type booties / rebuildbcd and press Enter. Please wait until the process is complete.

Step 7: When Windows prompts to add the installation media to the boot list, press Y on your keyboard.

That’s it. You can also use third party tools like Easy Recovery Solutions to easily rebuild BCD in a matter of few clicks.

Last words

These were the 8 best methods to correct the boot error 0xc000000e . You can also visit the page official of Microsoft support related to this issue for further assistance. For any questions, doubts or suggestions, do not hesitate to use the comment box. I would love to help.

Related posts

How to fix WerFault.exe error in Windows 10

Shubham

Disable driver signing enforcement in Windows 10

Shubham

Leave a Comment