Blog

Fix: page fault in non-paged area error

The mistakes from the blue screen of death (BSOD) are probably the most annoying type of error. A very frustrating BSOD error is PAGE FAILURE IN UNPAID AREA . Assuming you are here for help, I will explain the details about this error along with the methods to fix it .

What is PAGE FAILURE IN UNPAID AREA Error?

The area Not paged It is a memory compartment that contains data that is critical to the operation of the system. This data is always needed and therefore instead of exchanging the data between the RAM and the page file, the data is constantly stored in the RAM, in the non-paged area. Basically, this area is where the data that should not be moved from RAM to the page file is stored. When Windows cannot access critical memory data that was supposed to be stored in the Nonpaged area, for some reason, the error PAGE MISSING IN AREA NOT PAID born.

This error can occur in a desktop and in a laptop that It works with Windows XP, Vista, 7, 8, 8.1 and 10 . While facing this error, you may see error codes like STOP: 0X00000050 , STOP: 0x50, etc. However, it can sometimes also appear with names like ntfs.sys or ntoskrnl.exe .


Due to this problem, the system restore may stop working, the system may frequently start to crash, lose data, hardware fail, or even a complete loss of access to the PC may occur.

Causes

There are various causes for the development of the page BSOD error in a non-paged area on different systems. You must learn the superficial knowledge about the causes to learn how to fix this error. I will tell you about the common causes that could be causing the problem. These are the possible causes:

  1. Corrupt, outdated, or incorrectly configured device drivers, especially graphics card drivers.
  2. Damaged or damaged sectors on the hard drive on which you have installed Windows.
  3. Some fault in the RAM.
  4. Page memory disabled or incorrectly configured in System Properties.
  5. Disabled or interfering antivirus software, especially Windows Defender in Windows 10.

There may be other reasons as well, but I provide solutions regardless of the exact reason.

Page fault in a non-paged area Windows installation is one of the inquiries most common wanted, since this error usually appears when installing Windows 10 or any other Windows operating system

How to fix a page fault in a non-paged area

I provide the ready together with guide from Best methods to fix this error without doing too much work. You can test any method selectively, or you can test them one after another.

YOU CAN ALSO READ:   Minecraft creator disappoints fans with announcement of new game development

1. Repair faulty controller

Sometimes when you update a driver, it might not update properly and therefore starts to cause problems. In this method, you also need to search for such troublesome drivers and repair them. Follow these steps:

Step 1: Hold down the Windows key + R to access the dialog Run . Scribe devmgmt.msc on it and press Get in to open the Device administrator .

Step 2: Now right click on the device whose driver recently updated and go to Properties .

Step 3: Switch to tab Controller and then click the option Reverse controller . Then click Okay .

Step 4: If such option is not present on your system, click on the option Uninstall .

Step 5: reboot your PC to reinstall the drivers automatically.

or ,

You can also repair and update faulty drivers using software third parties What Driver Talent , Driver Easy , etc. Using these apps is like having a piece of cake. Just open them and follow the instructions that appear on your screen

Done. This could have fixed the error on your system. If the error persists, try the next method.

2. Adjust the Paging File Manager

If the hardware and drivers are working fine, you still face the Page Fault in Non-Paged Area error. This method will work perfectly for you. Follow these steps:

Step 1: Open the control panel . You can do it by typing control in the frame Run or Look for .

Step 2: Now click on System to access it.

Step 3: Move the cursor to the left side and click Advanced system settings .

Step 3: Now switch to the Advanced tab and click Setting in option Performance .

Step 4: now also switch to tab Advanced and click Change … in option Virtual memory .

Step 5: then uncheck the checkbox “Automatically manage paging file size for all drives” . Also, select the option No paging file and click Establish .

Step 6: Keep clicking To accept until you close all windows dialog boxes and then reboot his computer.

Step 7: Now go back to pass of the Step 1 to the Step 4 . For the next action, this time check “Automatically manage paging file size for all drives” and select the option Size managed by the system . Click on Establish and complete the process.

YOU CAN ALSO READ:   Israel used Ethereum technology to test the digital shekel

Done. You have completed the procedure. This may have solved the problem. If not, scroll down to the next method.

3. Run Check Disk and Memory Check

If corrupted RAM or faulty NTFS volume is the cause of Page Fault in Non-Paged Area error on your Windows 10, 8, 7 PC, then this method will solve your problem. Follow these steps to correct the error:

Step 1 Press the Windows key + S simultaneously to access the search and then write cmd at.

Step 2: Now right click on the symbol of the system and click Execute as an administrator .

Step 3: at symbol of the system , scribe chkdsk / f / r and then press Get in .

Step 4: Then press AND on your keyboard. Wait until the process completes.

Step 5: Now press the Windows key + R simultaneously to open the dialog Run . Scribe mdsched.exe and press Get in to access the window Windows memory diagnostics .

Step 6: Then click Restart now and check the options problems (recommended) . Your PC will then restart.

Step 7: Please wait patiently for the process to complete. Can take a few 15 minutes .

Done. This must have solved your problem. If the problem persists, try another method mentioned below.

4. Use the last known good configuration

This method worked accurately for many users. You can test it by following these steps:

Step 1: turns off your pc. Now start your pc. During startup, you will see a black screen .

Step 2: when it starts to appear white text in this black screen , press and hold the key F8 (Hold down F2 Yes F8 does not work in your case). Hold down the key until you see the Windows Advanced Options Menu.

Note: In Windows 8, 8.1 and 10, you must first enable the F8 key .

Step 3: From the list of options that appear on your screen, select the Last Known Good Configuration and press Get in . Your PC will restart and the error will be temporarily fixed.

Step 4: turn off and start your PC again, but this time press and hold the F12 key (keep up held down F10 Yes F12 does not work in your case) when the white text on the screen on black .

Step 5: in the list of available options, find and select Disable memory cache , save configuration and out .

YOU CAN ALSO READ:   HTC's revenue returned to growth for the first time in a long time

Step 6 : reboot your PC and let it boot completely.

Step 7: Now press the Windows key + R to open Run . Scribe chkdsk / f / r C: on it and press Get in .

Step 8: Wait patiently until the process is finished.

Done. You have successfully solved the problem like a pro. However, there are more ways if you still want to try. Move to down.

Resolve page fault in non-paged area Windows 10, 8, 7, XP

Sometimes simple methods work like charm compared to complex ones. Here are some easy methods you should try to fix page fault in non-paged area of ​​Windows 10.

Fix by disabling or uninstalling antivirus

If the program antivirus is causing the problem on your system, you should try to disable or uninstall antivirus software. Then check if the error is gone.

Note: Disabling or uninstalling antivirus is a risky action and is not permanently recommended.

Windows 7 Fix

If the RAM is the main culprit for this error, you need to open the external CPU panel and check if the RAM has problems. Has to remove the RAM, clean it wisely and then reinsert it correctly. Later reboot your PC and check the error.

Note: the RAM is a delicate part of your computer. You must handle it with care or you could permanently damage it.

Page_Fault_in_Nonpaged_Area Windows 8, XP Fix

Do the action mentioned in the picture.

Modern systems also allow you to restore your PC to its factory default state by accessing the Recovery partition . You can get information about the procedure on your manufacturer’s website.
OR,

if you want to access the Recuperation administrator within Windows, first click the button Beginning and then in All the programs . Now select and open the Recuperation administrator . Then proceed with the recovery process .

Note: Before proceeding with the recovery process, make sure that you have completely backed up your computer data elsewhere as the recovery process will uninstall all previous programs and erase the media on your PC / hard drive .

Conclusion

These were the best and most effective working methods available to correct the page fault in a non-paged area on Windows XP, Vista, 7, 8, 8.1 and 10. You have successfully cleared the error if you applied any of the methods correctly. Now you can enjoy using your PC without getting the BSOD error message on your screen.

Related posts

Xiaomi may become a new partner of the optics manufacturer

Shubham

Razer Blade 14: very thin and with RTX 3080

Shubham

How to turn off Windows 11 startup sound

Shubham

Leave a Comment