Fix Windows 10 won’t shut down completely: Many users report an issue where Windows 10 won’t shut down completely, instead they have to use the power button to completely shut down their PC. This seems to be another crucial issue with Windows 10 as user who has recently upgraded from earlier version of OS to Windows 10 seems to be facing this problem.
So users who have recently upgraded to Windows 10 are unable to shut down their computer properly as if they try to shut down it only the screen goes blank but the system is still ON as the keyboard lights are still visible, the Wifi lights are also ON and in short the computer is not shutting down properly. The only way to turn it off is to press the power button for 5-10 seconds to force the system to shut down, and then turn it on again.
The root cause of this issue seems to be a feature in Windows 10 called Fast Startup. Fast Startup helps your computer start up faster than normal startup. It basically combines hibernation and shutdown properties to give you a faster boot experience. Fast startup saves some of your computer’s system files to a hibernate file (hiberfil.sys) when you shut down your PC, and when you turn on your system, Windows will use these saved files from the hibernate file to boot extremely fast.
In case you are suffering from the problem of not being able to completely shut down your computer, then it seems that Fast Startup is using resources like RAM and processor to save files in the hibernate file and not releasing them. resources even after the computer has been shut down. So without wasting any time let’s see how to fix Windows 10 won’t really close completely issue with below listed troubleshooting guide.
Fix Windows 10 won’t shut down completely
Make sure to create a restore point in case something goes wrong.
Method 1 – Disable Fast Startup
1.Press Windows Key + R then type » powercfg.cpl ” Y press enter to open Power Options.
2. Click Choosing what the power buttons do in the upper left column.
3. Then click Change settings that are currently unavailable.
Four. Uncheck Turn on fast startup under Shutdown Settings.
5.Now click Save Changes and reboot your PC.
If the above fails to disable fast startup, try this:
1. Press Windows Key + X and then click Command Prompt (Admin).
2. Type the following command in cmd and press Enter:
powercfg -h shutdown
3. Reboot to save changes.
This should definitely fix Windows 10 will not completely close the problem, but if not, continue to the next method.
Method 2: Perform a clean boot
Sometimes third-party software may conflict with the system and thus the system may not shut down completely. So that Fix Windows 10 not closing completely you need to clean boot your PC and diagnose the problem step by step.
Method 3 – Rollback the Intel Management Engine interface drivers
1.Press Windows Key + R then type devmgmt.msc Y press Enter to open Device Manager.
2.Now expand the system device, then right click on Intel Management Engine Interface and select Properties.
3.Now switch to the Controller tab and click Revert controller.
4. Restart your PC to save the changes.
5. If the problem is not resolved, go back to the Intel Management Engine interface properties from Device Manager.
6. Switch to the Driver tab and click update driver and select Search automatically for updated driver software, and then click Next.
7. This will automatically update the Intel Management Engine to the latest drivers.
8. Restart your PC and see if you can shut down your computer completely or not.
9. If it is still stuck, uninstall them Intel Management Engine Interface Drivers from device manager.
10. Reboot your PC and Windows will automatically install the default drivers.
Method 4 – Disable the Intel Management Engine interface to turn off the device and save power
1.Press Windows Key + R then type devmgmt.msc Y press Enter to open Device Manager.
2.Now expand the system device, then right click on Intel Management Engine Interface and select Properties.
3. Switch to the Power Management tab and uncheck “ Allow the computer to turn off this device to save power. «
4. Click Apply followed by OK.
5. Restart your PC to save the changes.
Method 5 – Disable the Intel Management Engine Interface
1.Press Windows Key + R then type devmgmt.msc Y press Enter to open Device Manager.
2.Now expand System device then right click on Intel Management Engine Interface and select Deactivate.
3. If confirmation is requested, select Yes / OK.
4. Restart your PC to save the changes.
Method 6 – Run Windows Update
1. Press Windows Key + I and then select Update and security.
2. Then click Search for updates and make sure to install any pending updates.
3. After installing the updates, restart your PC to Fix Windows 10 won’t shut down completely.
Method 7 – Run Windows Update Troubleshooter
1. Type “troubleshooting” in the Windows search bar and click Solution from problems.
2. Then in the left window pane, select See everything.
3. Then, in the Troubleshoot my computer list, select Windows Update.
4. Follow the instructions on the screen and let Windows Update Troubleshooter run.
5. Restart your PC to save the changes.
This should help you fix Windows 10 won’t shut down completely, but if not, continue to the next method.
Method 8: Repair Install Windows 10
This method is the last resort because if nothing works then surely this method will fix all the problems with your PC. Repair Install only uses an in-place update to repair system problems without deleting any user data present on the system. Follow this article to see how to repair, install Windows 10 easily.
Recommended for you:
- Fix black squares behind folder icons
- Fix Task Scheduler service is not available error
- How to fix USB ports not working in Windows 10
- Fix File Explorer search not working in Windows 10
That’s all there is solved with success. Windows 10 won’t shut down completely, but if you still have any questions regarding this guide then feel free to ask them in the comment section.