After the recent Windows 10 update, you get the temporary profile login error “You are logged in with a temporary profile.” Due to this error, have you lost all your desktop data? Whenever you are faced with this temporary login error, you may notice that it will take a long time to log into the user profile. And the changes you make to this temporary profile will not be saved, therefore you will load a new profile each time you log in. Here in this post, we explain how to fix the temporary profile login error in Windows 10 / 8.1 and 7.
External drive like USB comes in handy when you need to copy files between computers or backup your important files like pictures, movies, archives and other data. Sometimes Windows users report You need to format the disk in the drive before you can use it error to USB plug, memory or SD card. And Windows won’t let you use the disk and access the data, until you format it. The above error occurs when you remove your external USB drive without using the Safely Remove option, resulting in the partition table of the USB drive being corrupted and unreadable.
This is a common error message in Windows caused by some hardware problems in the USB drive and the connection to the PC. Due to this error, you cannot access your data using Windows or another operating system. The above error occurs because when you accidentally – force – unplug (unplug) your external USB. You have two options: format it faster, or try to repair bad sectors and errors.
How to fix it, you need to format the disk in Windows
You must format the disk before you can use it. The Windows error mainly occurs if the external hard drive / USB suffers a power outage, a virus infected drive or there are bad sectors on the external hard drive causing the problem. If you also suffer from this problem, looking for solutions to solve it , you need to format the disk before you can use it. Here follow the steps below.
Use security Delete and restart windows
The above error occurs when you remove your external USB drive without using the Safely Remove option, resulting in the partition table of the USB drive being corrupted and unreadable. To avoid losing your data or corrupting the partition table of the storage drive, always make sure to use the safe delete option before disconnecting the drive. And in case you get a warning message ‘This device is currently in use. Close any programs or windows that may be using the device and then try again ‘, then restart your computer.
Repair error USB device not recognized Error code 43 in Windows 10
Try different USB ports
Also check with Plug your device into another USB port mainly on the Rear Panel of your computer and see if the problem persists. Try all the USB ports you have on your PC. If some USB port causes the problem, then with a different usb port this problem should be fixed.
Check for virus infection
Sometimes due to virus and malware infection, you may also face the problem like You need to format the disk before you can use it and the device stops responding. So before doing any other troubleshooting, running a virus and malware scan is a good solution. Just install the latest updated antivirus and run a virus scan. After completing the scanning process, just restart widnwos and plug the usb device back in and check the problem fixed.
Check USB drive for errors and bad sectors
Also disk errors and bad sectors can cause different errors. And if this needs to format the disk before you can use it, it is one of them. We recommend that you follow the steps below to check your disk drive for errors and repair them.
First, have in count the driver letter in the error, for example, “ You need to format the disk in drive F: on the Unit before you can use it. In this example, the drive letter is H.
Now open command prompt as administrator. Type below command and press the Enter key to run the command.
chkdsk (driveletter 🙂 / r (Change drive letter with yours).
For example, the drive letter in our example is “F:” therefore the command must be chkdsk F: / r
Wait until the scanning process is 100% complete. After that, just remove the USB drive, restart Windows and plug the USB device back in and check this time for the problem solved. If not follow the next step.
Use third party app
If the above methods do not fix this problem, you need to format the disk error, then you can use free third-party applications such as find and mount partition, Testdisk utility which helps to get back your important data.
partition find and mount
Simply download partition find and mount from the given download link and run the app as administrator. After that launch, the application -> Select the affected drive (for example, drive F) and click Scan. After completing the scanning process, just right click on it and select mount. Select the letter dirve and click OK. Now open my computer and you will notice the new mounting unit. open this and copy data from it. Now you can format the drive.
First Download Testdisk utility to your computer by following download link. After the download is complete, extract all the data to a specific folder. Next Now plug the unrecognized hard disk drive (HDD) into your computer. Now open the application testdisk_win.exe. Here press Enter on the Create option highlighted. Wait until TestDisk scans your computer
Now select the USB external hard drive and press Enter to continue with the disk analysis. Here, on the next screen, select the type of partition table and press Enter. After analyzing the disk, TestDisk should show the current partition structure.
Press Enter for Quick Search. After a successful recognition of your files as described above, press q to proceed to restore the partition table on your disk.
These are some of the best working solutions to fix it. You need to format the disk, you must format the disk before you can use it. Windows error message. I still have some query suggestion, feel free to comment below.