Microsoft Edge runs slow after Windows 10 May 2019 version 1903 update

Microsoft Edge is one of the fastest web browsers for Windows 10, it starts up in less than 2 seconds, loads web pages faster, and is also low on system resources. And with regular updates, the Edge browser gets new features and improvements to complete over Chrome and Firefox. But some of the usages report after Windows 10 1903 update Microsoft Edge runs slowly , web pages are slow to load and unresponsive, sometimes it says that this page cannot be reached not connected to the internet.

The Edge browser works extremely slow, when they try to access a web page in Microsoft Edge it hangs and advances slowly. Also, images on web pages do not load properly.

This problem, ” Microsoft pages Edge of slow loading and unresponsive »Is mainly due to corruption in the Edge application database while updating Windows 10 1903. Again, sometimes edge extensions, a large amount of browser cache and history, corrupted system files, etc. . can cause this problem. If you are having trouble with this issue, Edge is running slow, unresponsive, here’s how to make Microsoft Edge faster

On Windows computers, while the Boot / Start computer is seeing a Bootmgr missing error message, press ALT + CTRL + DEL to restart Windows. This Bootmgr missing error occurred mainly due to corrupted and misconfigured files, hard drive errors, bed sectors on the hard drive and OS update, outdated BIOS, and damaged or loose hard drive interface cables are the possible reasons behind the Windows 10 missing in bootmgr . Also many experienced Windows 10 users, bootmgr does not have the Windows 10 error , it is caused by booting from a hard disk or flash drive that is not configured correctly. In other words, you are trying to boot from a non-bootable source.

The error means that your BIOS cannot find the startup file on your boot volume, causing you to be unable to boot the system normally. First let us know what is Bootmgr and how does it work. Bootmgr is the Windows boot sequence manager first introduced in Microsoft Vista. Replaces the NTLDR boot manager in earlier versions of Windows. Bootmgr reads the boot configuration data and displays the operating system selection menu. NTLDR, Operating System Terms. The main job of this Bootmgr is to control the boot volume, help you when a computer starts to load pre-installed windows.

YOU CAN ALSO READ:   Simple steps to follow to gain more popularity online

Fix Bootmgr is missing in Windows 10

Windows Boot Manager o BOOTMGR is located on the boot volume of your computer’s operating system (mainly C: drive). Bootmgr controls the boot volume which helps start winload.exe when a computer starts loading pre-installed windows on the processor. In general, bootmgr is fully responsible for starting your computer’s operating system. Here are some working solutions for Fix Bootmgr Missing in Windows 10 Error .

Note: This fix works on all versions of Windows, including Windows 7, 8 and 8.1, Windows 10.

Delete all connected media

If you connect some external media like USB Drive, your BIOS can probably be loaded from the external device instead of the correct boot volume. So, delete all the media connected to your PC.

Check the boot order in BIOS

If after removing all connected media, BOOTMGR is not found, an error may still exist, then you need to check the boot order in BIOS. To do this, press Ctrl + Alt + Del to restart your computer. While the boot windows or manufacturer’s logo appears, keep pressing the dedicated key (commonly F12) to enter BIOS.

NOTE: The key to enter the BIOS can be F2, F8, F10, F12, Esc or Del, etc. If you are not sure, check with your computer manufacturer.

Here go to boot tab with left and right arrow key Now in boot tab use ↑ or ↓ key to highlight correct boot hard drive. Then use the + or – key to move your boot drive to the top to be the first boot device.

Run automatic repair

Windows has a built-in automatic repair tool that checks for and repairs all startup errors that are preventing Windows from starting normally. Before performing any troubleshooting steps, we recommend that you perform Startup Repair first. you can do this by following below.

First insert the Windows 10 bootable CD or DVD and restart your PC. Note: If you don’t have Windows Mendia to install, you can create one by following this procedure to create a bootable Windows USB / DVD

Now when you are prompted to press any key to boot from a CD or DVD, click any key on the keyboard. Next Select your language preferences and click Next. Click Repair your computer in the lower left corner.

YOU CAN ALSO READ:   Windows 10 April 2018, update version 1803 will install in less than 30 minutes

This will restart Windows and on the next screen. Under Choose an option screen, click Troubleshoot and then click the Advanced option. This will display all the available tools as shown below.

Now click Startup Repair. This will restart Windows and start the repair process. During the repair process, this will check the following points.

  • Missing / Corrupt / Incompatible Drivers
  • Missing / Corrupt System Files
  • Missing / Corrupt Boot Configuration Settings
  • Corrupt registry settings
  • Corrupt disk metadata (master boot record, partition table, or boot sector)
  • Installing problematic updates

Wait for the Windows startup / automatic repairs to complete. After that, reboot and you have successfully fixed the BOOTMGR is missing error. Still getting the same error, go to the next step.

Make Windows partition active

An active partition is a partition on your computer’s hard drive known as a boot partition that actually contains your PC’s operating system. Normally, only one partition can be active at the moment as C: drive, mainly where our window is installed. But sometimes that partition became inactive due to some reasons. And Reactive partition can mainly fix most boot errors such as bootmgr is missing. Let’s see how to react

First you have to access Windows advanced boot options . Here you will get the option to Open Advanced Command. Quick. When the command prompt opens, type the following commands

diskpart

This command will start the disk part utility at your command prompt. When diskpart starts, you will see a “DISKPART>” sign on the left side of your command prompt.

disk list

This will list all your connected drives on your computer.

select disk 0

Note: Select the hard drive where your window is installed. In my case, I am selecting Disk 0 because that is the only disk drive showing in my CMD and it is also where my operating system is installed.


partition list

This command will show you all partitions created on that disk from what you have selected.

select partition 2

Normally we are selecting partition 2 because that is our Windows partition, but that doesn’t prove that you will always have to select the second one because sometimes partition 1 can also be our Windows partition. So, select only that partition where your window is installed.

Note: Never select 100MB, 350MB, and 500MB partitions.

active

That will make your partition active.

Repair / fix boot files

After activating Windows partition, repairing damaged or missing boot file is the good experience to fix missing Bootmgr error on Windows 10 or Windows 7 computers. Also, your boot files may get corrupted by some updates Software, Virus or Windows / Software recently installed and it is better to repair it as soon as possible. you can do this fallow

YOU CAN ALSO READ:   Update KB4284835 fixes black screen error in Windows 10 April 2018 Update

Because this Bootmgr error cannot be started in Windows. Again, we need to open the command prompt via advanced boot option . Here on the Advanced startup screen, select the advanced command prompt when the command prompt appears, type the commands one by one, and hit the Enter key to run the command.

Diskpart
List volume
Get out of
Above command we performed to find out the installed Windows drive letter. Here make a note of the drive letter where Windows is installed. for me it is D drive. Now do the following commands to repair the bootmgr. (Note: Replace D with the installed drive letter from Windows.)

D: (your Windows drive letter)
Bootrec / fixmbr
Bootrec / fixboot
Bootrec / rebuildbcd

The above commands fix bootmgr errors. Now repair the hard drive for errors by running the following command.
Chkdsk / f / r Type this command and hit enterkey to repair hard drive and bed sector errors.

After completing the “chkdsk” command to 100%, just restart your computer, hopefully this time your windows start normally. If you still get the same error, go to the next step.

Windows Image Repair

After performing the above methods the problem is still not fixed, then repairing the Windows image can fix Windows startup issues including missing bootmgr. You can do this by following the first open command prompt and enter the following command:

DISM / Online / Cleanup Image / RestoreHealth

Press Enter to run the above command and wait for the process to complete, usually it takes 15-20 minutes.

NOTE: if the above command doesn’t work, try this: Dism / Image: C: offline / Cleanup-Image / RestoreHealth / Source: c: test mount windows

Dism / Online / Cleanup-Image / RestoreHealth / Source: c: test mount windows / LimitAccess

After the process is complete, restart your PC Check problem solved.

These are some of the best working solutions to fix boot error missing in Bootmgr on Windows 10, Windows 7 computer permanently. If you have any query suggestions, feel free to comment below.

Leave a Reply

Your email address will not be published.