TP-Link Login IP, Username, Password

Setting up the router can be a bit difficult. From Linksys to Netgear to TP-Link, each router has its own complications. Not just the initial setup, many times the login process is also time consuming. If you too have been caught in such a situation then we are here today to bring you out. In this article, we share the complete TP-Link router guide and related queries. , such as the login of Tp link , TPLink password change, etc.

It doesn’t matter if you are looking for a TP-Link Wi-Fi router or TP-Link modem router, you can sort it out for every issue.

But before we get started with the TP-Link router setup, followed by the TP-Link ( login process, let us know a little more about the key features of the router.

Key Features of the TP-Link Router

  • Incredible speed of up to 300Mbps.
  • It can handle multiple data streams simultaneously.
  • Ensures a stable and smooth network.
  • Offers multiple security protections aimed at the absolute privacy of data.
  • Friendly with each IEEE 802.11g and IEEE 802.11b devices.
  • Flexible access control function Easily set controlled access policies.
  • The Quick Setup Wizard has detailed step-by-step instructions for Tplink login and TP Link router setup.
  • Tplink routers are compatible with all major operating systems.
  • Integral NAT and DHCP server.
  • It has support for access control and parental control.
  • The Tplink router offers firmware update and web management.

How to configure TP-Link router

To start your router, follow the steps below to configure it first. This is the initial setup process, after which we will move on to How to Login to TP-Link Routers, and what you can do if you have forgotten your TP-Link login username and password.

YOU CAN ALSO READ:   AMD Graphics Driver Not Installed Error

Step 1: Connect your PC to the Internet before starting the installation process. Make sure use connect your system through broadband service.

Step 2: Now turn off everything from your computer, DSL cable / modem, or your TPLink router.

Step 3: Now put your router in an ideal place. An ideal location would be where it would not be in direct sunlight or where there is the least amount of wires or metal interference.

Step 4: After placing the router in the middle of the wireless network, proceed to the next step.

Step 5: There will be a web-based administration page. Here you must log in to your router Tp link .

Step 6: You can use TPLink’s default web address in the browser’s address bar. Scribe in the bar.

Step 7: If this web address doesn’t work for you, you can also use the default TP-Link login IP address of your router.

Step 8: Then provide the TP Link login username and password in the indicated fields. These login credentials are usually admin, when you haven’t made any changes before.

This is how you can easily configure your TP Link router. Now let’s move on to the tplink login process.

How to login to the Tp-link Router?

You can use this step-by-step guide to log into Tplink. This will work for both your wireless devices and your system as well.

YOU CAN ALSO READ:   US excludes company from blacklist

Step 1: To get started, to log into the Tplink router you will need to use the web-based utility.

Step 2: Launch any web browser on your computer or whatever wireless device you have.

Step 3: Then, in the web address, type the following default address of the router t plink. Or you can also use as the address IP in the address bar.

In case none of these steps work, check whether the web address or TP link 192.168 admin is used as the IP address or not.

Step 4: You will soon see a pop-up window. It is basically the Tplink login screen . You will need to fill in the default TP Link login credentials as prompted.

Step 5: After providing the correct credentials, you will be redirected to the administration page of the TP Link router. Now you can configure additional router settings.

So, a simple reminder for those who are new to TP Link router login, the default username and password is “Admin”. And if you want to change it to something more personal or funky, then we have an answer for that too.

TP-Link username and password

  • Username: admin
  • Password: admin
  • Login IP:

How to change the password of the TPLink router?

If you are looking for a way to change TP Link password, just follow the steps mentioned below.

Step 1: open Google Chrome or Internet Explorer. Then type any of the following in the address bar

Step 2: You will be asked to enter the default credentials. Scribe “Admin” as username and in the password field.

YOU CAN ALSO READ:   Huawei FreeBuds 4 review: the best TWS earbuds.

Step 3: Now click on the Wireless option on the left side menu present on the screen. And then select Wireless Settings from the submenu options.

Step 4: In the Wireless Settings window, the first field is Wireless network name . Change the name in this field and click the option Keep present at the bottom of the screen.

Step 5: Now to change the password, select Wireless security in the submenu of the wireless option present on the left side.

Step 6: Now under the WPA / WPA2 field , you will find the option Wireless password . Change the password accordingly from administrator to whatever you want.

Step 7: Click on the option “Keep” to apply the changes. But that is not enough to apply the changes.

Step 8: You will need to reboot your system to apply the changes. So, in the same TP link window, click on the System Tools option. And from the submenu, click on the Restart option and finally on the main panel. Click on the Restart button.

Read also: How to fix TP-Link router not working problem

That’s it. You are ready to connect. Make sure all your connected devices are up to date and now you can use the new password you set to connect your various wireless devices. We hope this guide is helpful in understanding the TPLink router and the TP-Link login process. If you have any queries, please share them with us in the comment section.

Related posts

Metro-Goldwyn-Mayer Film Studio will become part of Amazon


A list of 80 Smartphones Appeared on the network


Microsoft started using machine learning for Windows 10 updates


Leave a Comment