Windows has detected an IP address conflict

The IP address it’s the only thing on your computer, like a name. It is the identity of each PC, and this address is given to your computer when it connects to the Internet, so it is extremely important. However, sometimes you may get a Windows error message that says » Windows has detected an IP address conflict » .

If you’ve received this error and don’t know what to do, you’ve come to the right place! In this article, we will discuss the causes of this IP address conflict error in Windows 10/8/7 / earlier versions and we will see ways to fix it.

What is the IP address conflict error?

its IP adress it is very similar to a postal address. What Windows means when it says it has detected a conflict of IP adress is that he found several devices on the network, including his own, that have the same IP adress. Obviously this is not possible and it is a flaw but nevertheless this happens.

The problem generally lies in the configuration of its Pc or router. This could cause a IP address conflict error even if there is only one device on the network.

How to Repair Windows Has Detected an IP Address Conflict Error

Now that you understand why Windows detects an IP address conflict, let’s look at some simple ways to fix it.

YOU CAN ALSO READ:   Fix BOOTMGR is missing error in Windows 10, 8, 7

1. Restart Your Router – The Basic Step

Although it is basic, and you might think that it does not work, but reset your router it can mainly help to allow your router to properly assign a suitable IP address to your PC. Usually this happens due to a small router glitch, which can be fixed by doing this.

So, turn off your router and wait a few minutes. Then turn it back on to see if it connects your device properly and helps clear the error IP address conflict in Windows 10, 7 and 8.

2. Remove static IP

Basically, we will make sure that the IP address is generated automatically , modifying it in the TCP / IP Configuration. Sounds complicated? Is not! Follow the steps below to remove the static IP and remove the Windows IP address conflict error:

  • Press the Windows key + R
  • In the tab Run , type ncpa.cpl

  • Locate the network you are using and right click about her. Then select Properties
  • Find Internet Protocol Version 4 (TCP / IPv6)
  • Be sure to select Obtain IP address automatically and Get DNS server automatically .
  • That is all! Click on To accept twice, make sure the changes are made, and voila!

Reboot your PC, just in case. This should fix the error, and you will be able to access your network successfully again.

YOU CAN ALSO READ:   Headphones don't work in Windows 10

3. Release and update your IP address

Break free and renew its IP It is an easy step and it is known to help countless users with the Windows IP conflict problem. This is how you do it:

  • Run command prompt like administrator
  • Scribe the following command and press Get in:

netsh int ip reset c: resetlog.txt

ipconfig / release

  • Press enter again and scribe the final command:

ipconfig / renew

And we are done! Once you do this, your problem should be resolved automatically, and Windows has detected an IP address conflict message that will no longer be seen!

4. Update available drivers

The old drivers for the network card a sometimes they are the cause of the problem, and updating them to the current version can solve the problem for you. This can be done manually or by using a third party tool like Driver Updater .

These tools will easily identify drivers on your system that require updating, and update network card drivers, among others. It is a practical way to ensure that the Windows IP Address Conflict error disappear. And it’s better than doing it manually as you won’t make the mistake of installing the wrong version: Driver Updater it will do it all for you.

YOU CAN ALSO READ:   Fix "Your Windows license will expire soon" [0xc004f074]

Scan your computer in Driver Updater, and then update the necessary drivers. Once this is done, reboot your PC and check if the error goes away.

Therefore, update your drivers it can also easily fix the IP address conflict for you.

5. Disable IPv6

Disabling IPv6 has been shown to fix the problem for a group of users, and Microsoft Professionals advised you to give it a try. To do this:

  • On the WiFi icon on the taskbar, right-click and select Open Network and Sharing Center
  • Again select Center network and sharing

  • Please select its connection of current network , and this will open your properties
  • Click the button Properties in the window
  • Now just uncheck the Internet Protocol Version 6 (TCP / IP) and apply all the changes.

Reboot your computer. This should completely fix the IP address conflict error on your Windows 10 PC and you can access your network without problems.

Final verdict

We hope that by reading this article you were able to resolve the Windows IP address conflict issue using the above-mentioned methods. It can usually be fixed by the above methods, but if you still have questions about any of the steps, you can send us a comment below and we will try to respond with a relevant answer.

Leave a Reply

Your email address will not be published. Required fields are marked *